Japanese page

	Sp_PolyEdit.p / Sp_PolyLoad.p Ver.048 Doc 06.05.2007
	The polygonal polygon polygon line spline curve polygon belt is made. Eight kinds of snap options and the corner circular arcs can be set. Selected polygon and spline curve and a series of polygon line are read by bundled Sp_PolyLoad plug-in, and it can be edited. t is a deluxe version that strengthens a snap function of Sp_Polygon. :D

Sample Movie page

Directions of Sp_PolyEdit

Geometry that does the making edit becomes it in FG primary layer.
This will be called "Making object".

Geometry that does the snap becomes FG/BG.
This will be called "Reference geometry".

Please release the selection of all geometry before starting the plug-in.

There are four kinds of polygons that can be made, and 1024 independent polygons can be made at the same time.
The polygon of 1024 totals mutually becomes the object of the snap.

Outline
Main panel
Snap 1 TAB
Snap 2 TAB
Arc TAB
R/S TAB
Set TAB
Preferance TAB
Sp_PolyLoad.p
Tips

Main Panel Info disp - Each information is displayed in handle. UNDO - Cancellation of work REDO - Re-doing of work HELP - Help display of key combinations UNDO SET - When the panel numerical value is input, the change is stocked in the UNDO buffer. APPLY Continue - The made polygon is fixed and work is continued newly. Merge point - The point is merged. <<< >>> New - Buffer of made polygon Polygon type - Kind of made polygon Closed - It makes it to the shut polygon. Belt side - Direction of width of Belt type Belt width - Width of Belt type Belt Divide - The polygon of Belt type is divided. Position X Y Z - Coordinates of current handle Neck condition - Angle of neck and current handle ABS - Angle of which 0 degrees are directions of work plane right hand REL - Angle that neck handle makes Angle - Angle of neck Length - Distance of neck and current handle Keep angle - When Lc/Ls is changed, the angle with the neck is maintained. Lc - Difference between neck and current handle Ls - Difference between neck and current handle Constraint move - Movement limitation of current handle Axis - It moves along the plane coordinates axis. Seg - Direction of neck and current handle Sel Vertex / Snap Vertex - Point selection function in mouse Add mid-point - The point is made for the middle of the segment. Select vertex - Command that selects point Snap vertex - Command that selects snap reference point Hide - Display command of polygon Lock - Lock command of polygon Terminal - Change command in starting point Align - Line command of selection point

Snap 1 TAB Snap setting Edge - It is a snap in the polygon edge. ref - Geometry selection to do snap scope - Range to do snap Segment - The snap is done in the edge segment. Expand - The snap is done on the edge extension line. Swap edge point - The edge point of the edge is switched. E1 / E2 ratio - Ratio from edge point that does snap dist - Distance from edge point that does snap Parallel - It runs parallel to the edge that does the snap. Cross - It does at right angles with the edge that does the snap. Direction - It is a snap in a corresponding point in the direction. ref - Geometry selection to do snap dist - Distance from point that does snap Axis - It is a snap in a corresponding point to the plane coordinates axis. ref - Geometry selection to do snap dist X Y Z - Distance from point that does snap

Snap 2 TAB Snap setting Neck Angle - It is a snap in the angle of the neck. mode - Angle setting of neck unit - Unit of angle Local Angle - It is a snap in the rotation angle of the plane coordinates axis. ref - Geometry selection to do snap X Y Z - Rotation angle of each axis A1 / A2 dist - Distance from point that does snap Length - It is a snap in the distance from the neck. unit - Unit of distance Grid - It is a snap in the grid. mode - Standard setting in grid unit - Unit of grid

Arc TAB Setting of corner circular arc Arc type - Vertex of current handle is made a circular arc. non - It was squarish. corner - The placed corner is made a circular arc. 3pass - It makes it to the circular arc that passes over three points. Radius - Circular arc radius Segment - Circular arc number of partitions Angle - Circular arc angle Position X Y Z - Circular arc center point coordinates Constraint arc handle - Movement limitation of center point movement Free arc - It moves freely. Axis arc - It moves along the plane coordinates axis. Segment arc - It moves in the direction of the segment of the neck. Center only - Movement only of center point Create center point - The point is made for a center point. Convert Arc - It converts it into the circular arc. The circular arc is converted.

R/S TAB Rotation and scale Rotate - Angle that rotates selected vertex APPLY Rotate + / - - The rotation is executed. Scale - The scale does selected vertex. APPLY Scale + / - - The scale is executed.

Set TAB Edit of making polygon set Current / New - Storage set after it edits it Current - Set to be edited Copy - It reproduces. Add - It adds it. Divide - It divides. Erase - It completely deletes it.

Preferance TAB Initialization Polygon Type Init - Initialization of Polygon Type InfoDisp unit - The unit of the display of information is switched. PS axis limitation - Plane setting in perspective view port X Y Z - It fixes to the plane of a set axis. A - It switches in a perspective direction automatically. Snap pix range - Pixel radius of snap Handle pix range - Pixel radius in which steering wheel is gripped Panel undo - The slider also accumulates in the UNDO buffer including the change with the panel. Undo count - Number of undo buffers InfoDisp offset pix X / Y - Offset of display of information from current handle InfoDisp fix position - The position of the display of information is fixed. Display LcLs guide - Display of difference distance guide Display set number - The number of the polygon set is displayed. Display reference mark - The mark of the snap reference point is displayed.

Outline
Main panel
Snap 1 TAB
Snap 2 TAB
Arc TAB
R/S TAB
Set TAB
Preferance TAB
Sp_PolyLoad.p
Tips

※このスクリプトで生じた不具合などは責任を負えませんので、データ保存後に使用することをお勧めいたします。
※ご意見・バグ情報などございましたら　web-info(a)pictrix.jpまでお願いいたします。